3M™ Liqui-Cel™ Modules are membrane degassifiers used for removing CO2 and O2 from water, or for removing bubbles from ink. SnowPure is a stocking 3M™ Distributor.
3M™ Liqui-Cel™ Membrane Contactors – Data Sheets
Liqui-Cel Gas Removal Membranes
Click on the links below to view full data sheets. If you need help sizing a system for your degassing application, please contact us for additional assistance. Below also find the “G” model numbers. SnowPure can order any 3M Liqui-Cel product.
Degassing (O2, CO2) |
| Liqui-Cel™ Extra-Flow 2.5 x 8 Flow (Single Module): 0.5 – 3 gpm (0.1 – 0.7 m3/hr)
G280 (X40) Clamped G420 (X40) Welded, Typically in stock G453 (X50) Welded, Typically in stock G547 (X40) G648 (X50) G940 for Trans Membrane Chemisorption |
| Liqui-Cel™ Extra-Flow 4 x 13 Flow (Single Module): 2 – 15 gpm (0.5 – 3.4 m3/hr)
G492 (X50) *Sanitary G574 (X50) *Stainless Steel *Sanitary G491 (X40) Typically in stock G614 (X50) Typically in stock |
| Liqui-Cel™ Extra-Flow 4 x 28 Flow (Single Module): 4.4 – 30 gpm (1 – 6.8 m3/hr)
G288 (X40) Typically in stock G324 (X40) G333 (X40) G503 (X50) Typically in stock G504 (X50) G506 (X50) |
| Liqui-Cel™ Extra-Flow 6 x 28 Flow (Single Module): 5 – 50 gpm ( 1.1 – 11.4 m3/hr)
G520 (X50) ABS G520R (X50) ABS, Rotated, Typically in stock G580R (X40) ABS, Rotated, Typically in stock |
| Liqui-Cel™ Industrial Extra-Flow 8 x 20 Flow (Single Module): 5 – 50 gpm ( 1.1 – 11.4 m3/hr)
G868 (X40) PVC, Typically in stock |
| Liqui-Cel™ Stainless Steel Extra-Flow 8 x 20 Flow (Single Module): 5 – 50 gpm ( 1.1 – 11.4 m3/hr)
G869 (X40) *Stainless Steel *Sanitary |
| Liqui-Cel™ Extra-Flow 8 x 40 Flow (Single Module): 30 – 125 gpm ( 6.8 – 28.4 m3/hr)
G847 (X40) |
| Liqui-Cel™ Extra-Flow 8 x 80 Flow (Single Module): 30 – 125 gpm ( 6.8 – 28.4 m3/hr) |
| Liqui-Cel™ Extra-Flow 10 x 28 Flow (Single Module): 44 – 250 gpm (10 – 57 m3/hr)
G440H (X40) PVDF Lined Fiberglass, Viton Seals G449H (X40) PVDF Lined Fiberglass, EPDM Seals G511H (X50) PVDF Lined Fiberglass, EPDM Seals G655 (X40) G700H (X50) Unlined Fiberglass, Typically in stock G885H (X40) G885RH (X40) G886H (X50) *Stainless Steel *Sanitary |
| Liqui-Cel™ Industrial 14 x 28 Flow (Single Module): 70 – 400 gpm (16 – 90.8 m3/hr)
G533S (X50) PVC Nylon Endcaps, typically In Stock G533RS (X50) PVC Nylon Endcaps with Rotated Ports, typically In Stock |
| Liqui-Cel™ Extra-Flow 14 x 40 Flow (Single Module): 70 – 550 gpm (16 – 125 m3/hr) |
Small “Mini & Micro” Modules |
| MicroModule 0.5 x 1 Flow (Single Module): 5 – 30 ml/min
G591 (X50) Polycarbonate Housing G884 (X50) HDPE Housing |
| MiniModule 1 x 5.5 Flow (Single Module): Up to 500 ml/min
G543 (X50) |
| MiniModule 1.7 x 5.5 Flow (Single Module): Up to 2500 ml/min
G542 (X50) |
|
MiniModule 1.7 x 8.75 Flow (Single Module): Up to 3000 ml/min G541 (X50) |
SuperPhobic Modules – for debubbling and plating |
|
|
Superphobic 1×6″ G909W (SP) Superphobic 2×6″ G642W (SP) – Quick Disconnect fittings G923 (SP) Typically in stock G924W (SP) Typically in stock G925W (SP) Typically in stock G926W (SP) Typically in stock G927W (SP) Typically in stock |
|
Superphobic 2.5×8″ G631 (SP) Superphobic 4×28″ |
3M™ Liqui-Cel™ Membranes / Modules / Contactors are used for gas removal from water and other fluids. Liqui-Cel™ uses a patented fiber and flow design, and modules (and standard design pilot systems) are available in a variety of sizes for flow rates between 0.5 – 400 gpm (0.1-91 m3/hr).
Larger flow rates are achieved by piping contactors in parallel. Enhanced removal of gases are achieved by piping contactors in series.
“Liqui-Cel” is a trademark of 3M™.
Larger flow rates are achieved by piping contactors in parallel. Enhanced removal of gases are achieved by piping contactors in series.
“SuperPhobic” SP contactors are the best option for low surface tension fluids such as inks. “Superphobic” is a 3M™ trademark. Liqui-Cel™ SP Series membrane contactors remove bubbles and dissolved gases from processed liquids to help prevent foaming, nozzle malfunction, misfires and poor drop formation. This helps increase line and printing speeds while minimizing downtime and defects for a faster, smoother printing process—and high-quality output
“MiniModule” and “MicroModule” devices are a good fit if you have small flow rates. “MiniModule” and “MicroModule” are trademarks of 3M™.
3M™ Liqui-Cel™ Membrane Contactors are widely used for O2 removal as well as CO2 removal from water. They have displaced the vacuum towers, forced draft deaerators, and chemical oxygen scavengers.
Liqui-Cel™ Membrane Contactors come in many sizes that process a range of flow rates. We help you choose the product size based on your flow rate and gas removal requirements.
SnowPure technical service can run a GasCAD performance projection for your project.
