Betafine High Purity XL and PBG Filters:
SnowPure is authorized to sell Solventum/Cuno Betafine high-purity filter cartridges. Betafine XL filters (absolute micron rating – single layer) are ideal for food and beverage, ultrapure water, and electronics. Specifically, Betafine PBG filters (graded density -multi-layer) are higher capacity and used for prefiltration. Betafine™ filters are also CFR 21 compliant. In addition, 3M/Solventum pleating technology (APT) gives high surface area, long life, and low pressure drop.
Betafine was created by Cuno, which was integrated into Solventum (now part of Thermo Fisher)
Betafine XL High Purity Absolute Micron Rated Filters
SnowPure sells Solventum Betafine high-purity filter cartridges. Betafine™ XL filters are ideal for food/beverage, ultrapure water, and electronics.
Cartridges range from 10 to 40 inches long, are rated from 0.2 um (micron) to 40 um (micron) absolute. They also have a wide range of end configurations and seal materials. See Solventum Betafine site.
| 0.2 micron | 0.5 micron |
| 1.0 micron | 2.5 micron |
| 5 micron | 10 micron |
| 20 micron | 40 micron |
B: Spear with 226 O-ring
C: Spear with 222 O-ring
F: Flat End with 222 O-ring
D: Double Open End
R: with SS Spring
Seal Materials: Silicone, EPR, PE, FEP/PFA-encapsulated
Construction: Betafine™ XL series filters are single-layer ABSOLUTE filters. They feature 100% PP Polypropylene filter cartridge construction. This then provides chemical and thermal compatibility (up to 80C) in many demanding process fluid applications. Betafine™ XL filters are constructed from continuous micro-fibers that provide a uniform matrix and minimize shedding. Solventum Betafine XL filter site.
Betafine PBG High Purity Gradient Density Filters
SnowPure also sells Solventum Betafine PBG high-purity multilayer, gradient density, depth filter cartridges. Betafine™ XL filters are ideal for food/beverage, beer, wine, spirits, and even ultrapure water.
Seal Materials: Silicone, EPR, PE, FEP/PFA-encapsulated
Construction: Betafine™ PBG series filters are multi-layer GRADIENT filters. They feature 100
% PP Polypropylene filter cartridge construction. This provides chemical and thermal compatibility (up to 80C) in many demanding process fluid applications. In addition, Betafine™ XL filters are constructed from continuous micro-fibers that provide a uniform matrix and minimize shedding. Solventum Betafine XL filter site.
Cuno’s Advanced Pleat Technology (APT):
Pleated filters may offer a large gross surface area, but only part of the surface area is usable when the media is packed too tightly into the cartridge, resulting in both flow restrictions and limited contaminant holding capacity. For example, the “blind” or unusable area commonly occurs near the inside diameter, where the pleats are packed most tightly. The Cuno Betafine™ XL Filter Cartridges feature Cuno’s Advanced Pleat Technology (APT) design for extended service life. This design maximizes the useful surface area while maintaining open flow paths between media pleats.
Ask for a Solventum Betafine Filter Quotation.
Ask for Solventum Betafine Filter Selection Assistance.
